WARNING
■
The belt locks and the belts must be in their original position after folding
back the seat cushions and backrests - they must be ready to use.
■
The seat backrests must be securely interlocked in position so that no ob-
jects in the luggage compartment can slide forwards if there is sudden brak-
ing - risk of injury!
■
Ensure that the rear seat backrests are properly engaged. It is only then that
the three-point seat belt for the middle seat can reliably fulfil its function.
■
Ensure that the cross rod is inserted into the mounts
C
» Fig. 79
or » Fig. 80 in the front position!
Using the net partition behind the rear seats
Fig. 79
Pull out the net partition
First read and observe the introductory information and safety warn-
ings on page 86.
Pulling out
›
Pull the net partition by the bracket
A
» Fig. 79 out of the housing
B
in direc-
tion of the holders
C
.
›
Insert the cross rod into one of the mounts
C
and push forwards.
›
In the same way, insert the cross rod into the mount
C
on the other side of the
vehicle.
Folding
›
First pull the cross rod back slightly on the one side and then on the other side
and remove it from the mounts
C
» Fig. 79.
›
Hold the cross rod in such a way that the net partition can slowly roll up into
the housing
B
without being damaged.
ä
If you wish to use the entire luggage compartment, the foldable luggage com-
partment cover can be removed » Fig. 70.
Using the net partition behind the front seats
Fig. 80
Pull out the net partition
First read and observe the introductory information and safety warn-
ings on page 86.
Pulling out
›
Fold the rear seats forward » page 78.
›
Pull the net partition by the bracket
A
» Fig. 80 out of the housing
B
.
›
First of all insert the cross rod into the mount
C
on one side and push it for-
ward.
›
In the same way, insert the cross rod into the mount
C
on the other side of the
vehicle.
Folding
›
First pull the cross rod back slightly on the one side and then on the other side
and remove it from the mounts
C
.
›
Hold the cross rod in such a way that the net partition can slowly roll up into
the housing
B
without being damaged.
›
Fold the rear seats back into their original position.
ä
87
Seats and Stowage
To Next Page
Loading...
