“Parking position” of the boot cover
Fig. 64 Parking position of the luggage compartment cover: Rapid / Rapid
Spaceback
First read and observe the introductory information and safety warn-
ings on page 64.
Adjustment
›
Rapid: Slide the dismantled cover between the rear seat backrest and the bolt
A
» Fig. 64.
›
Rapid Spaceback: Slide the dismantled cover between bolt
B
and contact sur-
face
C
of the side panel.
WARNING
■
The luggage compartment cover in the “parking position” restricts the driv-
er's view at the back
1)
.
■
When adjusting the “parking position”, the boot cover must be between the
bolt
B
» Fig. 64 and the rear seat backrest
2)
- risk of damaging the rear seat
backrest and the boot cover.
CAUTION
■
The following information applies to Rapid Spaceback vehicles.
■
Before setting the “parking position” of the luggage compartment cover, the
variable loading floor must be put in the desired position» page 70.
■
If the luggage compartment cover is in the “parking position”, the “parking po-
sition” of the variable loading floor cannot be set » page 73
2)
.
1)
Applies to Rapid.
2)
Applies to Rapid Spaceback.
68
Using the system