Group
Size class of
the child seat
a)
Front passenger seat
b)
Rear seats outside Rear seat middle
2
15-25 kg
- X IL X
3
22-36 kg
- X IL X
a)
The size category is shown on the label attached to the child seat.
b)
If the front passenger seat is fitted with system attachment points, it is suitable for the installation of an child seat with “Semi-Universal” approval.
IL The seat is suitable for installation of a child seat with the “Semi-Universal” approval. The “Semi-Universal” category means that the child seat
with the
system is approved for your vehicle. Observe the list of vehicles that comes with the child seat.
IUF The seat is suitable for the use of approved forward-facing child seats in the “Universal” weight group category.
X The seat is not fitted with system attachment points.
Use of child safety seats with the - system
Overview of the usefulness of child seats fastened with the
system on
each of the seats.
Front passenger seat Rear seats outside Rear seat middle
X i-U X
The seat is suitable for forward and backward facing
child seats of
the category “Universal”.
The seat is not suitable for the
child seat of the category “Universal”.
Attachment points of the
system
Fig. 20 Attachment points of the
-system
i-U
X
is a fastening system, which restricts the movement of the upper part
of the child seat.
The attachment points for attaching the belt for a child seat with the
system are located on the rear side of the outer rear seat backrests » Fig. 20 -
.
Some country-specific models may also feature an attachment point on the
back of the middle rear seat backrest » Fig. 20 -
.
WARNING
■
Always refer to the instructions from the manufacturer of the child seat
when installing and removing a child seat with the system.
■
Only use child seats with the
system on the seats with the at-
tachment points.
■
Only ever attach one belt from the child seat to a locking eye.
25
Transporting children safely
To Next Page
Loading...
