B - 4-pin connector
q for lambda probe and heating for lambda probe
q on the underside of the vehicle on right in direction of travel below a plastic cap
1 - 3-pin connector
q for hall sender - G40-
q black
2 - Hall sender -G40-
q below the camshaft wheel
3 - Valve for variable intake manifold changeover -N156-
4 - Intake air temperature sender -G42-
5 - Throttle valve control unit -J338-
6 - Control unit for Simos -J361-
7 - Coolant temperature sender -G62-
8 - Air mass meter -G70-
9 - 3-pin connector
q for knock sensor 1 -G61-
10 - Ignition coils -N- and -N128- with power output stage -N122-
11 - Engine speed sender -G28-
12 - 3-pin connector
q for engine speed sender
q grey
13 - Knock sensor 1 -G61-
14 - Injection valves - N30- to -N33-
15 - Fuel pressure regulator
16 - Activated charcoal filter system solenoid valve 1 -N80-
/ 9$!254►
The component A is not shown on the overview figure.
5+
To Next Page
Loading...
