A - Clutch pedal switch -F36-
q in footwell on the clutch pedal
1 - 3-pin connector
q for hall sender - G40-
q black
2 - Hall sender -G40-
q under top toothed belt guard
3 - Lambda probe -G39-
q with heating for lambda probe -Z19-
q Identification characters AEH: fitting location catalytic converter
q Identification characters AKL: fitting location exhaust manifold (illustration)
4 - 4-pin connector
q for lambda probe and heating for lambda probe
q on the driver side below a cover
5 - Valve for variable intake manifold changeover -N156-
6 - Control unit for Simos 2 -J361 -
7 - Throttle valve control unit -J338-
8 - Air mass meter -G70- with intake air temperature sender -G42-
9 - Coolant temperature sender -G62-
10 - Earth connection
î5î
To Next Page
Loading...
