Establishing a connection via the CarStick device
Connecting a CarStick device
Applies to Infotainment Amundsen.
Fig. 19
Connecting a Carstick device
›
Switch on the ignition.
›
In the front USB port
A
, insert the CarStick
B
with inserted SIM card in
“Mini” format.
›
Wait approximately one minute until the red light on Carstick stays continu-
ously lit (if the red lights up, then disconnect and re-connect the Carstick ).
›
Select the data services setting and enter the PIN code of the SIM card, see
steps
1
to
3
.
Establishing a connection
Fig. 20
Establishing a connection
›
With first use, select the data services setting and the desired data service
provider, see steps
4
and
5
.
21
Internet connection