Skoda SUPERB - 05-2010 - Multimedia

Communication 159
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
In order to enable the music playback via Bluetooth
®
, it is necessary to first connect
the device to be connected with the hands-free system in the menu Phone -
Bluetooth - Media player.
The music playback process is performed on the connected device.
Note
The device to be connected must support the Bluetooth
®
profile A2DP, see Owner's
manual of the device to be connected.
Multimedia
Inputs AUX-IN* and MDI*
The input AUX-IN is located below the armrest* of the front seats and is marked with
.
The input MDI is located in the storage compartment on the front passenger side.
The inputs AUX-IN and MDI connect the external audio sources (e.g. iPod or MP3
player) and play back music from these devices via your radio* or navigation system*
installed in the factory.
The description of the operation can be found in the relevant Owner's Manual of your
radio* or your navigation*.
Note
 The loudspeakers in the vehicle are matched to a power output of the radio and
navigation system of 4x 20°W.
 For the equipment sound system*, the loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.
CD changer*
The CD changer for the radio and navigation system is located in the right side
compartment of the luggage compartment.
Loading a CD
– Touch the button  fig. 146 and guide the CD (compact disc) into the CD-case
. The CD is automatically loaded onto the next free position in the CD-changer.
The LED in the corresponding button stops flashing.
Loading all CDs
– Hold the button pressed and guide all CDs one after the other into the CD-case
. The LEDs in the buttons are no longer flashing.
Loading a CD to one definite position
– Briefly touch the button . The LEDs in the buttons light up at the memory
spaces, which are already assigned and flash in the case of free memory spaces.
– Touch the desired button and guide the CD into the CD-case .
Ejecting a CD
– Briefly touch the button , in order to eject a CD. For assigned memory spaces,
now the LEDs light up in the buttons .
– Touch the corresponding button . The CD is ejected.
Fig. 146 The CD changer
A
C
A
B
A
D
A
C
A
B
A
D
A
C
A
D
A
D
A
B
A
A
A
D
A
D
s3fg.2.book Page 159 Friday, April 30, 2010 12:17 PM