Instruments and warning lights20
The multi-functional indicator is equipped with two automatic memories. The
selected memory is displayed in the middle of the display field page 19, fig. 18.
The data of the single-trip memory (memory 1) is shown if a 1 appears in the display.
A 2 shown in the display means that data relates to the total distance memory
(memory 2).
Switching over the memory with the help of the button fig. 19 on the windscreen
wiper lever or with the help of the button on the multifunction steering wheel*
fig. 19.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ignition
is switched on until it is switched off. New data will also flow into the calculation of the
current driving information if the trip is continued within 2 hours after switching off
the ignition. The memory will be is automatically erased, on the other hand, if the trip
is interrupted for more than 2 hours.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual jour-
neys up to a total of 19 hours and 59 minutes driving or 1.999 kilometres driven and
on vehicles which are fitted with information display* up to a total of 99 hours and 59
minutes driving or 9.999 kilometres driven. The memory is deleted when either of
these limits is reached and the calculation starts from anew.
The total-trip memory will not, contrary to the single-trip memory, be deleted after a
period of interruption of driving of 2 hours.
All information in the memory 1 and 2 is erased if the battery of the vehicle is
disconnected.
Operating with the buttons on the windshield wiper lever and on
the multifunction steering wheel*
Fig. 19 Multi-functional indicator: Controls on the windshield wiper lever / controls on the
multifunction steering wheel
The rocker switch and the button are located on the windshield wiper lever
fig. 19. Switching over and resetting is performed with the handwheel fig. 19
on the multifunction steering wheel.
Selecting the memory
– After briefly pressing the button on the windshield wiper lever or by briefly
pressing the button on the multifunction steering wheel, you can select the
desired memory.
Selecting the functions with the help of the windshield wiper lever
– Press the top or bottom rocker switch for longer than 0.5 seconds. In this way,
call up in sequence the individual functions of the multi-functional indicator.
Selecting the functions with the help of the multifunction steering
wheel
– By pressing the button , you can call up the menu of the multi-functional indi-
cator.
– Turn the handwheel upwards or downwards. In this way, call up in sequence
the individual functions of the multi-functional indicator.
– Short-term pressing of the button allows to select the highlighted function.
To Next Page
Loading...
