Seats and Stowage 75
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
CargoFlex folding box*
Lowering and securing folding box
You can transport the folding box in two different positions - in the trans-
port position against the partition ⇒ fig. 78 of the luggage compartment,
or in the ready position lowered onto the floor of the luggage compart-
ment ⇒ fig. 79.
Lowering folding box into the ready position
– Pull the snap handle in direction of arrow 1 ⇒ fig. 78. The folding box
is lowered to just above the floor of the luggage compartment.
– Press the folding box at the arrow positions 2 ⇒ fig. 79 onto the floor
of the luggage compartment until it locks in place. If correctly locked,
the snap handle moves back into its initial position (the top red
surface of the handle is not visible).
Securing folding box in the transport position against partition of
luggage compartment
– Lower the folding box into the ready position ⇒ page 77.
– Pull the snap handle in direction of arrow 1 ⇒ fig. 78. The folding box
is raised up from the luggage compartment floor.
– Raise and press the folding box against the partition of the luggage
compartment, it is secured audibly in this way in the transport posi-
tion. If correctly locked, the snap handle moves back into its initial
position (the top red surface of the handle is not visible).
Opening folding box ⇒ page 76.
Caution
• The parts of the folding box can be damaged if handled roughly or in an unpro-
fessional way.
• Before you lower the folding box B into the ready position ⇒ fig. 79, it is neces-
sary to remove the net*, in order to avoid net damage.
B1Z-0042HB1Z-0042H
Fig. 78 Folding box:
Transport position
Fig. 79 Folding box:
ready position
To Next Page
Loading...
