Skoda SUPERB IV 2020 - Adaptive Cruise Control (ACC)

WARNING
Risk of the cruise control system starting uninten-
tionally!
▶
Deactivate cruise control after use.
Status display in the instrument cluster display
illuminated - the cruise control system is acti-
vated
illuminated - cruise control is active
When cruise control starts, the set speed is
displayed.
Operating conditions
✓ The driving speed is higher than 20 km/h.
Operation
Operating with the lever
A
Activate GRA (cruise control inactive)
Disable GRA
Interrupt control (sprung position)
B
Resume cruise control
1)
/ Increase speed
C
Start control at the current speed / reduce
speed
D
Show menu of assistance systems - Possibility
to switch between GRA and speed limiter
Accelerate temporarily
›
Depress the accelerator pedal.
Releasing the accelerator pedal will cause the speed
to drop again to the set speed.
Interrupt speed control
▶
After pressing the brake pedal.
▶
After an ESC intervention.
Troubleshooting
Cruise control system faulty
illuminates
›
Get the help of a specialist company.
Adaptive Cruise Control (ACC)
Functionality
Control
ACC maintains the set speed. When your vehicle ap-
proaches the vehicle in front, ACC will automatically
start to maintain the set distance to this vehicle.
Maintaining the set speed and the distance will here-
inafter be referred to as Control.
WARNING
ACC does not respond to stationary objects or to
crossing or oncoming objects.
ACC is intended primarily for use on motorways.
Speed range
Depending on the equipment, ACC allows a speed
setting in the range of 30-160 or 30-210 km/h.
If control is started at a speed of less than 30 km/h
on vehicles with an automatic transmission, the
speed is automatically increased to 30 km/h or con-
trolled according to the speed of the vehicle ahead.
Distance level
The distance to the vehicle ahead can be adjusted to
five dierent levels.
WARNING
▶
Maintain a minimum distance in accordance with
the country-specific legal regulations.
Automatic stopping and starting with automatic
transmission
A vehicle with an automatic transmission can be de-
celerated to a stop using the ACC and start moving
again. Control is disconnected in case of longer hold-
ing periods.
To resume control:
›
Depress the accelerator pedal.
Or:
›
Set the lever to position
.
Control is interrupted when the brake pedal is de-
pressed.
Overtaking
If your vehicle changes to the fast lane and no vehi-
cle is detected in front, ACC accelerates up to the
set speed.
Status display in the instrument cluster display
illuminates - ACC is activated
1)
If no speed is set, the current speed is adopted.
160
Driver assist systems › Adaptive Cruise Control (ACC)