Lane limitation highligh-
ted on the right: system
intervenes on the right
when approaching the
lane marking.
The lines are highlighted
in colour on the coloured
display.
Warning through steering wheel vibrations
The steering wheel vibrations are triggered in the
following situations.
▶
The vehicle crosses the boundary line without the
flashing light switched on.
▶
The system is unable to keep the vehicle in the
lane.
›
Correct the steering movement in the event of vi-
brations.
Functional conditions
✓ The driving speed is higher than 60 km/h.
✓ The lane markings are clearly visible.
Functional restriction
The system function may be restricted in the follow-
ing cases.
▶
The field of view of the sensor is limited by a dirty
screen or an obstacle or a preceding vehicle.
▶
In the event of unfavourable weather conditions.
▶
When driving through a sharp bend.
▶
When driving on a steep road or in ruts.
▶
When the driving lane is too narrow.
▶
When driving through construction sites.
WARNING
Risk of incorrect steering intervention!
Certain objects or markings on the roadway can be
incorrectly recognized as boundary lines.
▶
Always keep your hands on the steering wheel and
be prepared to override the steering intervention.
Settings
Activation / deactivation in the instrument cluster
›
Press the button on the multifunction steering
wheel.
›
Select
Lane Assist
.
Setting in Infotainment
In the menu:
Troubleshooting
Message regarding system unavailability
›
Clean the windscreen in the sensor area.
›
Stop the engine and restart again after a short
time.
›
If the system is still not available, seek the help of a
specialist garage.
Travel Assist
Usage
Travel Assist helps to keep the vehicle within the
lane while controlling the speed of the vehicle.
Functionality
Travel Assist uses the functions Lane Assist and
ACC.
WARNING
Risk of accident!
▶
Always keep your hands on the steering wheel and
be ready to take over the steering.
▶
The notes in the functional description of Lane As-
sist and ACC must be observed.
Adaptive lane guidance
This function keeps the driver within the selected
position within the lane.
Status display in the instrument cluster display
is lit up – the system is activated, cruise con-
trol and adaptive lane guidance are active
is lit up – the system is activated, cruise con-
trol is active
is lit up – the system is activated, adaptive
lane guidance is active
Functional conditions
✓ ACC is enabled.
✓ The max. driving speed is 210 km / h.
✓ The lane markings are clearly visible.
Functional restriction
Travel Assist is only for support and does not relieve
you of the responsibility for driving.
The function may be restricted or unavailable in the
following cases.
▶
The field of view of the sensor is limited by a dirty
screen or an obstacle or a preceding vehicle.
▶
In the event of unfavourable weather conditions.
163
Driver assist systems › Travel Assist
To Next Page
Loading...
