Area View environment overview
Usage
The area view assists the driver in parking and ma-
noeuvring by displaying the vehicle area.
Overview
General overview
A
3D views:
Top view
View obliquely from above
View from the side
General overview
By moving your finger across the screen, you can
change the viewing angle.
Camera rear view
A
Mode for transverse parking
B
Mode for parallel parking
C
Mode for driving up to a trailer/distance moni-
toring
D
Mode for monitoring the area behind the vehicle
(wide view)
Front camera view
A
Mode for transverse parking
The orientation lines are used for estimating dis-
tance as well as for displaying the route, which is
controlled at the current steering angle.
B
Mode for monitoring the area in front of the ve-
hicle (wide view)
The area right in front of the vehicle is marked
by the blue lines.
C
Distance monitoring mode
Side camera view
A
Left side
B
Right side
C
Left and right side
The yellow line is shown at a distance of about
40 cm from the vehicle.
Operating conditions
✓ The ignition is switched on.
✓ The driving speed is lower than 15 km/h.
Operation
Switching on
›
Engage reverse gear.
Or:
›
Press the
button.
Selecting the camera image
The respective camera image is selected by touching
the screen in the Infotainment in the area next to, in
front of or behind the vehicle silhouette. The selec-
170
Park Assist systems › Area View environment overview
To Next Page
Loading...
