›
Have the vehicle checked immediately by a spe-
cialist garage.
Charging does not start or is cancelled
A message indicating that no charging is possible is
displayed.
›
Disconnect the charging cable from the vehicle
and plug it in again.
Or:
›
Use another charging option.
›
If the charging process does not start or is inter-
rupted again, seek the help of a specialist garage.
Charging time increases
If the high-voltage battery is too hot after driving,
the charging current can be systematically reduced
by subsequent charging in order to protect the high-
voltage battery from overheating. This lengthens the
charging time.
Charging cable
What you should be mindful of
We recommend that you only use charging cables
supplied by ŠKODA AUTO. With these, the reliability
as well as correct functionality are guaranteed.
WARNING
Risk of short circuit as well as serious or fatal injuries!
▶
Only use a suitable charging cable to charge the
high-voltage battery.
NOTICE
▶
Have the charging cable checked regularly by a
qualified service technician.
Information on the use of the charging cable
▶
Protect the parts of the charging cable from un-
wanted stress, e.g. from overrunning, falling, pull-
ing, kinking or bending over sharp edges.
▶
When disconnecting from the socket or charger,
do not pull on the cable but only on the plug.
▶
After using the charging cable, insert the protec-
tive caps.
▶
Protect the parts of the charging cable from in-
tense sunlight (the outside temperature must not
exceed 50 °C).
▶
Do not immerse parts of the charging cable in wa-
ter and ensure it is protected from snow or ice.
▶
Before charging at cold temperatures, attach the
supplied protective ring to the charging plug. This
protects the plug-charging socket connection
from freezing.
Before driving abroad
Check whether your charging cable is suitable for
the specific procedures in places in each country.
In Norway, for example, the construction of elec-
trical systems is based on dierent technical specifi-
cations than those in other European countries.
Functionality
Charging cable types
▶
Charging cable for charging stations (Mode 3).
▶
Charging cable for standard power outlets (Mode
2).
Charging cable for charging stations (Mode 3)
The charging cable can
be used to charge vehi-
cles at public charging
stations that do not have
an integrated charging
cable.
The vehicle can be
charged with a maximum
charging current of 16 A.
At some charging sta-
tions that oer charging with a charging current of
32 A, charging with a cable intended for charging
with a charging current of 16 A is not possible.
Charging cable for standard power outlets (Mode
2)
The charging cable can be used for charging at
standard power outlets.
Control box (Mode 2)
Through the control box, the charging plug is de-
energised until it is plugged into the charging socket
of the vehicle.
When the charging cable is connected to the power
outlet, the control box automatically carries out a
self-test. All warning and indicator lights illuminate
briefly and go out one after the other.
The current operating status is then displayed.
A
Indicator light
power plug
(plugged into
the mains sock-
et)
B
Indicator light
control box
C
Indicator light
vehicle
D
Warning light
Overview of the cable control box
179
High-voltage system › Charging cable
To Next Page
Loading...
