EasyManua.ls Logo

Skoda SUPERB IV 2020 - Digital Instrument Cluster

Skoda SUPERB IV 2020
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A
Energy recovery
The energy generated during braking is stored in
the high-voltage battery during recuperation.
B
Internal combustion engine speed
C
Boost
Status of full acceleration using the internal
combustion engine and the electric motor.
Display overview
Depending on the equipment, the following informa-
tion is shown on the display.
A
Time
B
Directional display
Gear engaged / gear
recommendation
Selector lever posi-
tions of the auto-
matic transmission
Trac signs detec-
ted
C
Menu, indicator
lights and information
D
Outside temperature
or - low outside temperature
E
Total distance travelled
F
Trip - Distance travelled after resetting the
memory
Overview of the main menu items
Driving data » page 63.
Assistants - Activate / deactivate assistance sys-
tems.
Navigation - e.g. show driving recommendations,
compass, destination list.
Audio - Using radio and media.
Telephone - call list, accept or reject incoming call.
Vehicle - Vehicle condition » page 66.
Operation
Operation via the multifunction steering wheel
A
Turn - Switch be-
tween menu items /
set values
Press - Confirm
menu item
Press - Return one
level higher in the
menu
Hold - Display the
main menu
Press - Show previous menu (if one was selec-
ted) / Show phone menu
Settings
Set language
The language is set in the following menu in the Info-
tainment system.
Setting the time
Press and hold the button in the instru-
ment cluster until the menu item
Time
is
displayed.
Release the button, the display shows the hour set-
ting.
Press the button repeatedly and set the hours.
Wait 4 seconds, the display shows the minute set-
ting.
Press the button repeatedly and set the minutes.
Wait 4 seconds, the display shows the initial set-
ting.
The time is set in the Infotainment system in the fol-
lowing menu.
Reset the odometer
Briefly press the button in the instrument
cluster.
Set the brightness of the instrument cluster light-
ing
The brightness of the instrument lighting is automat-
ically adjusted depending on the given lighting condi-
tions.
When low beam is switched on, the brightness of
the instruments lighting can be adjusted in the fol-
lowing menu in the Infotainment system.
Or:
Digital instrument cluster
Overview
Overview of the instrument cluster display
61
Driver information system › Digital instrument cluster

Table of Contents

Related product manuals