What to do if the wiring of the winch motors in my Skov DOL 339 is incorrect?
If the wiring of the winch motors is incorrect, see the wiring diagrams, paying attention particularly to the supply voltage via the relays.
Information about the software version and release date.
Details on revisions to the manual and product.
Critical safety information regarding the alarm system.
Overview of the DOL 339 climate and production computer.
Steps for setup, installation, and startup of the DOL 339.
Detailed instructions for physically installing the DOL 339 and its components.
Mounting the DOL 339 unit with the DOL 278 system.
Instructions for mounting the DOL 339 climate computer.
Guidance on installing auxiliary contactors.
Information on mounting the DOL 278 emergency opening.
How to mount climate sensors for optimal readings.
Comprehensive guide covering electrical connections and initial setup.
Details on electrical connections for the DOL 339.
Setting the correct mains voltage for the computer.
Overview of the DOL 339's technical menu structure.
How to select and configure system components.
Procedures for connecting various system components.
System adjustment procedures.
Navigating the adjustment menu.
Configuring temperature sensor settings.
Defining brooding zones for climate control.
Procedures for calibrating system components.
Navigating the calibration menu.
Calibrating air inlets and outlets.
Calibrating temperature sensors for accuracy.
Calibrating humidity sensors for accuracy.
Calibrating the silo weighing module.
Performing calibration for the drum scale.
Accessing user-specific setup options.
Accessing user-specific setup options.
Configuring metric or US units.
Adjusting screen brightness and contrast.
Accessing system service and information menus.
Accessing system service and information menus.
Reviewing the system's operation log.
Testing essential system components.
Testing essential system components.
Testing indoor temperature and humidity sensors.
Testing auxiliary sensors if installed.
Performing tests on the alarm system.
Testing the emergency opening unit.
Testing optional components using manual control.
Accessing the manual/auto control menu.
Testing climate control functions.
Testing the operation of air inlets and outlets.
Testing stepless fan speed and placement.
Testing the AUT/MAN switch functionality.
Testing MultiStep and Tunnel MultiStep units.
Testing relays for climate control systems.
Testing sequential heating operations.
Testing the emergency air inlet function.
Checking current ventilation status.
Testing various production-related functions.
Testing relays for feeding, silo, and lighting systems.
Testing the feed weigher system.
Navigating the system settings menu.
Navigating the system settings menu.
System settings related to climate control.
Configuring MultiStep exhaust units.
Managing ventilation transitions between modes.
Adjusting ventilation parameters and limits.
Settings for fan speed controllers.
Configuring internal fan speed controllers.
Configuring external fan speed controllers.
Settings for heating systems.
Configuration for standalone heating units.
Settings for spray cooling systems.
Settings for pad cooling systems.
Settings for the pressure sensor.
Adjusting the CO2 sensor.
Adjusting auxiliary sensors.
Setting up night setback for temperature control.
System settings related to production operations.
Configuration for bird weighers.
Settings related to silo operations.
Settings for day silo operations.
Settings for the light dimmer.
Configuration for the feed system raising.
Settings related to feed delivery.
Configuring automatic silo change settings.
Settings for Info Matic system.
Password settings for system access.
Configuring view levels for menu visibility.
Menu to view component connection details.
Option to manually allocate I/O.
Connecting a UPS for power stability.
Configuring settings for winch motors.
Assigning CAN addresses to modules for communication.
Configuring CAN termination jumpers for short cables.
Configuring CAN termination jumpers for long cables.
Providing extra power supply to relay modules.
Adjusting drum scale settings.
Navigating the calibration menu.
Calibrating air inlets and outlets.
Calibrating the silo weighing module.
Performing calibration for the drum scale.
Accessing user-specific setup options.
Accessing system service and information menus.
Testing essential system components.
Testing indoor temperature and humidity sensors.
Testing auxiliary sensors if installed.
Performing tests on the alarm system.
Testing the emergency opening unit.
Accessing the manual/auto control menu.
Testing the operation of air inlets and outlets.
Testing stepless fan speed and placement.
Testing the AUT/MAN switch functionality.
Testing MultiStep and Tunnel MultiStep units.
Testing relays for climate control systems.
Testing sequential heating operations.
Testing the emergency air inlet function.
Checking current ventilation status.
Testing various production-related functions.
Testing relays for feeding, silo, and lighting systems.
Testing the feed weigher system.
Testing electronic silo and day silo weighers.
Testing the drum scale functionality.
Testing bird weighing systems.
Testing the light dimmer control.
System settings related to climate control.
Configuring MultiStep exhaust units.
Managing ventilation transitions between modes.
Adjusting ventilation parameters and limits.
Settings for fan speed controllers.
Configuring internal fan speed controllers.
Configuring external fan speed controllers.
Settings for heating systems.
Configuration for standalone heating units.
Settings for spray cooling systems.
Settings for pad cooling systems.
Settings for the pressure sensor.
Adjusting the CO2 sensor.
Adjusting auxiliary sensors.
Setting up night setback for temperature control.
System settings related to production operations.
Configuration for bird weighers.
Settings related to silo operations.
Settings for day silo operations.
Settings for the light dimmer.
Configuration for the feed system raising.
Settings related to feed delivery.
Configuring automatic silo change settings.
Settings for Info Matic system.
Password settings for system access.
Configuring view levels for menu visibility.
Managing data and software using a CF card.
Navigating the CF-card menu.
Steps for updating the system software.
Accessing and understanding control parameters.
Functionality and settings for cycle time control.
Procedures for adjusting system pressure.
Adjusting negative pressure settings.
Managing transitions between roof and side ventilation modes.
Setting minimum air inlet for ventilation.
Adjusting active pressure settings for ventilation.
Adjusting stepless units for optimal performance.
Solutions for common system issues.
Table relating temperature to sensor control values.
Specifications and technical details of the DOL 339.
To Next Page
General