SKY-WATCHER SynScan EQ6 Pro User Manual

8
PART II: INITIALIZATION
This step only applies to a mount with Auto-homing feature (such as the Sky-Watcher EQ8
Equatorial mount).
• The LCD screen will display “Auto-Home?” in the rst line, and display “1) YES 2) NO”
in the second line.
• Press “2” to skip this step and proceed to the next step.
• Press “1” to start the auto-homing routine on the mount. Once complete, the screen will
display “Home Position Established”. Press ENTER to proceed to the next step.
• During auto-homing routine, pressing the ESC key will stop the mount’s movement. The
screen will display “Home Position NOT Established.” Press ENTER to proceed to the next
step.
• After the home position is established, the LCD screen will display “Add DEC offset?” in
the rst line, and display “1)YES 2)NO” in the second line.
• Press “2” to skip this step and proceed to the next step.
• Press “1” and then use the numeric keys and the LEFT/RIGHT directional keys to enter
offset (in degree) of the declination axis and then press ENTER key to conrm. The decli-
nation axis will start slewing to the designated offset position. This function is designed
for side-by-side dual telescopes setup.
Geographic Coordinates
The LCD screen will display “Enter Location” in the rst line, and display longitude and lat-
itude in the second line.
• Press the numeric keys at the cursor position to ll the longitude and latitude digits.
• Use the scroll keys to change east/west longitude or north/south latitude when the cur-
sor blinks on the corresponding characters (E/W for longitude, N/S for latitude).
• Use the Left and Right direction keys to move the cursor.
• Press the ENTER key to conrm the input and proceed to the next step.
• Press the ESC key to return to Step 4 or Step 3.
4. Auto-homing
5. Setting Information of the Observing Site
Time Zone
The LCD screen will display “Set Time Zone” in the rst line, and display the current time
zone in the second line.
• Use the scroll keys to change the leading “+” or “-” sign when the cursor is on it. The “+”
sign is used for time zones in the Eastern Hemisphere (Europe, Africa, Asia, Oceania),
while the “-” sign is used for time zones in the Western Hemisphere (North and South
America).
• Press the numeric keys at the cursor position to ll the time zone digits.
• Press the ENTER key to conrm the input and proceed to the next step.
• Press the ESC key to return to the previous step.

SKY-WATCHER SynScan EQ6 Pro Specifications

General

Brand	SKY-WATCHER
Model	SynScan EQ6 Pro
Category	Racks & Stands
Language	English