To Next Page

To Previous Page

DIGITAL

AUDIO

SAT IN1 NETWORK HDMI USB 12V = INSAT IN2

Unplug

If you are replacing your cur

rent Sky Box, please

unplug all of the cables from your current Sky

Box. Please use those supplied with your new Sky

Box.

Plug In

1. To get started, connect your new Sky Box to

your TV with the HDMI cable. Make sure that

it matches the input that’s selected on your TV

(e.g. HDMI 1).

2. Screw in your satellite cable into this SAT IN1 port.

3. This is for your Ethernet cable which gives

you the fastest internet connection. If your

WiFi router is close by, plug one end of your

Ethernet cable in here and connect the other

to your router. If it’s not close by, you can

connect wirelessly during the on screen set up.

4. Plug in the power cable here and plug the power

supply into a power source. Switch on the power

and the system will boot up automatically.

5. Connecting your remote to your new Sky Box is

easy: simply remove the plastic pull tab from the

battery cover on your remote. The batteries will

connect and automatically pair with your Sky Box.

12 3 4

Questions and Answers:

Need help?

Do you have a question about the Sky Box and is the answer not in the manual?

Sky Box Specifications

General