When you are out in the wild it isn’t always possible to nd a clean area to land your Skydio 2.
To initiate a case landing, the Skydio case must be in view of Skydio 2’s camera while it is
landing. A yellow ring will appear around the case in the live video feed to indicate that
Skydio 2 has seen the case and will land on it. If you do not see the yellow ring, Skydio 2 will
not land on the case and will continue to descend straight down.
Piloting or nudging the vehicle during a case landing will cancel the case landing and
continue with a normal landing.
Case Landing
Note: If a ight is initiated by taking o from a case (or a case is placed at Skydio
2’s exact take o point), GPS positional accuracy cannot be relied upon to
guarantee a case landing when using the Return to Home function (or in the case
of an RTH triggered by lost communication).
21
To Next Page
Loading...
