21 Skydio X2D - QGC Operator Manual © 2022 Skydio, Inc. All rights reserved.
A rally point can be used as an emergency landing location ans a point where the drone will travel upon completing
a mission. The default rally point will be the takeo location.
To create and use a new rally point:
Step 1 - Select the Plan tab
Step 2 - Select the Rally icon
Step 3 - Tap on the map to place a rally point
• edit a rally point by selecting it and then changing
either its longitude, latitude, or relative altitude
• move a rally point by holding down on it and
dragging it on the map
• delete a rally point, select the point you want to
delete. Select the hamburger icon in the top right
of the rally point panel and delete.
Rally Points
QGC Flight
NOTE: although you can set multiple rally points, the drone will only use the first point set.
To Next Page
Loading...
