Skydio X2D Manual

Skydio X2D Connection Status
When flying at max range, point the controller cover toward X2D and hold the controller as far away from your body as possible. Bringing the
controller too close to your body will impact wireless performance. Signal strength and maximum control range may be aected when flying in
areas with electromagnetic interference.
The connection status indicator displays the current strength
of the signal connection between your controlling device and
your X2D and the number of satellites you are connected to.
Select the connection status icon to view.
• the more bars in the Connection Status indicator the stronger the
RF signal
• you need a minimum of four satellites to establish the position of
your X2D
• you need 7-12 satellites for a solid stable connection
• hand carry or fly your drone to a dierent location to search for a
stronger GPS signal
• during flight check GPS quality in dierent areas to see where you
may be able to utilize GPS flight in the future
© 2022 Skydio, Inc. All rights reserved.
• point the controller cover in the direction of the drone to maximize
the connection
• if you are unable to acquire a signal after manually selecting your
channels, it is likely your signal is being jammed
• in the event of an RF signal loss, your drone will default to the
emergency behaviors you set
• when flying in attitude mode, it is important that you have an RF
connection between your controller and X2D
• if flying in Attitude Mode, the drone will perform an emergency
landing in place

Skydio X2D Specifications

General

Brand	Skydio
Model	X2D
Category	Drones
Language	English