Skydio X2D Manual

Skydio X2D How to Load Maps
To load maps in the field you need to have the maps downloaded onto a USB-C memory drive. Maps persist across flights and power cycles.
To load maps in the field:
Step 1 - Save your map files on a USB-C
flash drive
Step 2 - Power ON the Enterprise Controller
Step 3 - Insert the USB-C flash drive into
the Enterprise Controller
Step 4 - Select the INFO menu
Step 5 - Select Maps and Import Maps
Step 6 - Navigate to your storage device
• select the maps to import
Step 7 - Tap Select in the top right corner
• wait as your maps import
Step 8 - select View Map Library to
review your imported maps
• if you have uploaded a QGC
map, you will also see an option
to open Skydio QGC
Step 9 - Drag, pinch, and zoom
• until your desired location is
centered on the screen
Step 10 - Select Download Map
• downloaded maps will be 3.5 m (5.6 km) square centered on your
target point
© 2022 Skydio, Inc. All rights reserved.
NOTE: The map library is able to store 10 maps at a time. Delete unused
maps to make room for new maps.

Skydio X2D Specifications

General

Brand	Skydio
Model	X2D
Category	Drones
Language	English