Need help?Do you have a question about the Skylift Mini-Derrick Super 6000 Low Pro and is the answer not in the manual?
General| Brand | Skylift |
|---|---|
| Model | Mini-Derrick Super 6000 Low Pro |
| Category | Utility Vehicle |
| Language | English |
Provides information on operation and safety practices for the Skylift Mini-Derrick Super 6000 LP.
Intended for authorized and experienced personnel, assuming prior knowledge of Skylift equipment.
Explains the use of high and low speed settings for the track undercarriage based on terrain and conditions.
Details the skid steer type of steering mechanism using two hydraulic handles for directional control.
Describes the adjustable throttle control for engine RPM, its function, and adjustment method.
Explains the slope gauge for monitoring machine tilt and the associated warning indicators for safe operation.
Explains how to operate the hydraulic tool circuit using manual handle or switch.
Details the multi-use Jib/Pole Guide function controlling four attachments: material handling jib, can handler, pole claw.
Explains how to control auger rotation/direction or main boom winch using a selector valve.
Discusses the 440-degree work zone, rotation stop, and continuous rotation option.
Provides instructions on operating the wireless radio remote control for drive and boom functions.
Details mounting and use of the electric recovery winch for simultaneous drive and winch operations.
Explains the option of 1,250 or 2,000 watt power inverters for AC power supply.
Describes the option for single or dual man bucket attachments and their capacities.
Details the Can Handler attachment, its capacity, pinning positions, and winch control via Jib/Pole Guide.
Details the Material Handler attachment, its capacity, function, and tilt control via Jib/Pole Guide.
Provides a brief overview of the Scanreco G2B Radio Control System components and features.
Covers locating the CU, applying grease, feeding and securing cables for installation.
Presents the terminal schematic for the CU, including analog and digital input/output pin assignments.
Explains special logic functions, wire inputs/outputs, and their operational requirements.
Details CU layout, indicators, switches, connectors, LEDs, internal display, and error codes for operation.
To Next Page