Skyline Furniture Twin Platform bed frame PBD User Manual

1
components
(H7) x 6
1” x 5/16” bolt
Twin Platform bed frame assembly
(H5) x 5
1” x 1/4” bolt
(H1) x 10
1/4” bolt
(H4) x 4
3/4” washer
larger hole
(H3) x 4
3/4” x 5/16” bolt
(H2) x 14
1/4” nut
(H6) x 1
3/4” washer
smaller hole
(H8) x 6
1 1/4” washer
(H12) x 8
3/4” screw
optional
(H13) x 2
L bracket
optional
(H10) x 1
Larger L wrench
(H9) x 1
Smaller L wrench
(H11) x 1
Wrench
hardware
Please note: you will need a at head and phillips head screwdriver to assemble your bed frame.
item description qty
A Metal corners 4
B Metal side rail 2
C Metal end rail 2
D Corner leg 4
E Center support rail 1
item description qty
F Center support leg 1
G Upholstered side rail 2
H Upholstered foot rail 1
J Wooden slat roll - not shown
(located in headboard box)
1
For all twin size PBD styles
A
B
C
D
E
F
G
H

Skyline Furniture Twin Platform bed frame PBD Specifications

General

Brand	Skyline Furniture
Model	Twin Platform bed frame PBD
Category	Furnace
Language	English

Summary

Building the Metal Bed Frame

Metal Corner Placement

Place metal corners in a rectangular shape for the bed frame.

Attaching Metal Rails

Lay metal side and end rails into corners and snap into place.

Securing Metal Frame Components

Secure metal rails to corners using bolts and nuts with wrenches.

Attaching Corner Legs

Attach corner legs to metal corners using bolts and washers.

Center Support System Setup

Center Support Rail Installation

Align and attach center support rail to side rails with bolts/nuts.

Center Support Legs Attachment

Attach center support legs to the center support rail with bolts/washers.

Wooden Slat Roll Assembly

Place and attach wooden slat roll to the frame using bolts/nuts.

Upholstered Rails Assembly

Initial Upholstered Rail Attachment

Loosely attach upholstered rails to the frame using bolts and washers.

Final Upholstered Rail Tightening

Push upholstered side rails to eliminate gaps and then tighten.

Optional Rail Stability Reinforcement

Reinforce upholstered rails with L brackets and screws for stability.