Need help?Do you have a question about the Skyrc Ultimate Duo D260 and is the answer not in the manual?
General| Brand | Skyrc |
|---|---|
| Model | Ultimate Duo D260 |
| Category | Power Supply |
| Language | English |
Charges two batteries simultaneously with different chemistries.
Supports both AC (100-240V) and DC (11-18V) power inputs.
Features AUTO function for safe charging, malfunction detection, and alarms.
Acts as a DC power source for other equipment.
Stores up to 10 charge/discharge profiles per channel for quick recall.
Allows users to adjust the end voltage for expert use.
Monitors and balances individual battery cells during discharge.
Offers FAST CHG and STORAGE modes for lithium batteries.
Includes RE-Peak mode and Delta-peak sensitivity for NiMH/NiCd.
Supports 1-5 cycles of charge/discharge for battery refreshing.
Sets an upper limit for charging current for NiMH/NiCd batteries.
Features Voltage/Resistance Meters and Capacity/Time Limits.
Provides a 5V/2.1A USB output for charging other devices.
Covers unattended operation, environment, and proper connection.
Lists voltage and charge rates for various battery types.
Lists batteries that should not be charged or discharged.
Emphasizes checking program suitability, current, voltage, and connections.
Details charge quantity calculation and connection polarity.
Highlights caution for lithium battery connections and parallel/series wiring.
Explains discharge purpose, voltage limits, and memory effect.
Switches between Channel A and Channel B.
Stops progress or returns to previous screen.
DEC and INC buttons to decrease/increase parameter values.
Confirms settings, stores parameters, and starts/resumes processes.
Details AC (100-240V) and DC (11-18V) input connections.
Shows connection for 12V DC battery or 11-18V DC power supply.
Emphasizes connecting leads to charger first, then battery, and reverse on disconnect.
Explains LiPo connection using a balance adapter and polarity.
Details connection for NiMH, NiCd, or Pb batteries.
Covers connecting to AC/DC power and then connecting the battery.
Describes using the built-in switching power supply.
Details connecting to a 12V car battery or DC power supply.
Shows the correct way to connect battery balance wires to the charger.
Explains manual program setting and memory profiles.
How to navigate and select the LiPo battery program.
How to select the desired mode (e.g., Balance Charge).
How to set charge current, voltage, and cell count.
How to initiate the charging process.
Verifies detected cells against set cells; prompts for correction if mismatch.
Displays real-time charging information.
Indicates when charging is finished and provides summary.
How to manually stop the charging process.
Details how to view various real-time data during charging/discharging.
How to choose NiMH or NiCd battery type.
Setting up standard charge mode, current, and starting.
Automatic detection and charging for NiMH/NiCd batteries.
Steps for using the NiMH Auto Charge mode.
Setting up discharge mode, current, and voltage cut-off.
Details the re-peak charging process for NiMH/NiCd batteries.
Explains the discharge/recharge cycling process for NiMH/NiCd.
How to choose the Pb (Lead-Acid) battery type.
Introduces Charge and Discharge modes for Pb batteries.
How to set up the standard charge mode for Pb batteries.
Steps for standard Pb charging, including voltage and cell count.
How to set up and perform AGM battery charging.
How to set up and perform cold weather charging for Pb batteries.
How to set up and perform discharge for Pb batteries.
Displays info like cut-off, safety timer, and input voltage.
Steps to use the D260 as a DC power supply.
Guide to saving charge/discharge profiles for batteries.
How to recall previously saved battery profiles.
Adjusts output voltage and current for DC power supply.
Sets an automatic safety timer for charging processes.
Sets a maximum charge capacity limit.
Selects between Celsius and Fahrenheit for temperature display.
Defines rest time between charge/discharge cycles.
Adjusts delta peak sensitivity for NiMH/NiCd batteries.
Enables/disables audible feedback for button presses and alerts.
Sets a minimum input voltage to protect the battery.
Resets the charger to its default factory settings.
Displays hardware and firmware versions.
Diagram showing correct battery connection for voltage checks.
Shows the voltage for each individual cell.
Displays total, highest, and lowest battery pack voltages.
Diagram showing correct battery connection for resistance checks.
Shows the resistance for each individual cell.
Displays total, highest, and lowest battery pack resistances.
Disclaimer regarding product use and manufacturer liability.
Information on warranty coverage, period, and overseas service.
To Next Page