EasyManua.ls Logo

Skytec CSB12 - Page 2

Skytec CSB12
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 - 12
UK
ACTIVE PA SPEAKERS
Congratulations on the purchase of this SkyTec active speaker box. Please read this manual
carefully prior to using the unit.
TO ENSURE MANY YEARS OF TROUBLEFREE USE, PLEASE OBSERVE THE FOLLOWING
Hearing damage: Loudspeakers are easily capable
of generating high sound pressure levels (SPL)
sufficient to cause permanent hearing damage to
performers, production crew and audience
members. Caution should be taken to avoid
prolonged exposure to SPL in excess of 90 dB.
Do not overload the box to avoid damage to the
speakers.
Do not place an open fire (candle, etc.) on top or
next to the box - FIRE HAZARD
Only connect to an earthed mains outlet of
230Vac/50Hz.
For indoor use only. If the box is used outdoors,
you need to make sure that no humidity can enter
the box.
When not in use, unplug the unit from the mains.
Unplug the unit from the mains prior to checking or
replacing the fuse.
Make sure that the box is placed on a stable,
strong surface.
The boxes can be stacked but do not put more
than 60kg weight on the box.
The boxes can be hung. Use only strong and
approved mounting material. During the mounting,
make sure that nobody is standing below the
mounting area.
Place the stand always on a flat, level, and stable
surface and that the legs do not present a trip
hazard.
Use only stands which are designed to support the
weight of the speaker. Do not attempt to place
more than one speaker on a stand designed for a
single speaker.
Route cables so that peoples will not trip over them
pulling the speaker over.
Do not place liquids on the box and protect it
against humidity. Humidity can shorten the life
time considerably.
Only use suitable means of transportation if you
want to move the box – BEWARE OF YOUR
BACK !!
If the unit is damaged to an extent that you can
see internal parts, do not plug the unit in a mains
outlet. In this case, please contact Skytec.
Always unplug the unit during a thunderstorm or
when it is not in use.
If the unit has not been used for a longer period
of time, condensation can occur inside the
housing. Please let the unit reach room
temperature prior to use.
Never try to repair the unit yourself. It does not
contain any user serviceable parts.
Run the mains lead in such a way that nobody
can fall over it and nothing can be put on it.
Only use the supplied mains lead or another lead
recommended by SkyTec.
Set the unit to the lowest volume prior to
switching it on
Keep the unit out of the reach of children.
Protect your environment. Recycle
packing material whenever possible.
Do not throw a faulty unit into normal
household waste but bring it to a special
collection point. A large part of it can be
recycled.
Type: CSB12 CSB15 CSB212 CSB215
Power
600W 800W 1200W 1600W
Woofer
12” 15” 2 x 12” 2 x 15”
Horn
Piezo Piezo Piezo Piezo
SPL Max
115dB 118dB 115dB 118dB
Frequency Range
40Hz – 20kHz 35Hz – 20kHz 40Hz – 20kHz 35Hz – 20kHz
Power supply
220-240VAC / 50Hz
Dimensions (mm)
(W x H x D)
59 x 41 x 32cm 64 x 48 x 34cm 96 x 42 x 32cm 112 x 48 x 37cm
Supplied
Per piece
Order Code 178.477 178.480 178.483 178.486

Related product manuals