FEATURES：
：：
：
1. MICPHONES:
DJ/Mc have their own dedicated level control. Microphones have individual 2 band EQ section
2. TALKOVER
This is a two position switch OFF/ON
3. TRIM CONTROLS
Each of the music channels has a rotary trim control. The gain control adjusts the input level allowing the user to reduce or increase
the sound level. NOTE: care should be taken not to produce distortion with these controls as this could result in damage to both the
unit and any external equipment connected.
4. TONE CONTROLS
Each channel has dedicated Bass, Mid and High controls. NOTE: Care should be taken not to distort the output signal using these
controls.
5. CHANNEL LEVEL
These are used to adjust the output level for each channel.
6. CROSSFADER
The crossfader allows the mixing of one source into another .The crossfader in your unit is removable and can be easily replaced if
needed.
7. CHANNEL SELECTORS
These are used to switch between Line input and PHONO、MIC input on each channel.
To Next Page
Loading...
Need help?
General