37
TECHNICAL DATA
TYP XXS XS S M L
CELLS 51 51 51 51 51
FLAT SURFACE AREA [QM] 21,85 24,71 26,89 28,87 31,83
FLAT WINGSPAN [M] 10,99 11,68 12,19 12,63 13,26
FLAT ASPECT RATIO 5,52 5,52 5,52 5,52 5,52
AREA PROJECTED [QM] . 18,57 20,99 22,85 24,54 27,05
PROJECTED WINGSPAN [M] 8,7 9,25 9,65 10 10,49
PROJECTED ASPECT RATIO 4,07 4,07 4,07 4,07 4,07
WEIGHT [KG] 4,6 4,9 5,2 5,6 6,0
LEGAL LAUNCH WEIGHT [KG] 55-75 70-90 80-100 90-110 100-130
TOW YES YES YES YES YES
JET FLAP TECHNOLOGY YES YES YES YES YES
MOTOR CERTIFICATION NO NO NO NO NO
THE SERIES TAG IS PRINTED ON THE INSIDE OF THE STABILO.
THE CERTIFICATION TAG CAN BE FOUND IN A POCKET ON THE MIDDLE PRO-
FILE RIB.DATE AND PILOT OF THE FIRST FLIGHT MUST BE ENTERED. THE
CERTIFICATION TAG MUST BE ATTACHED TO THE PARAGLIDER IN GERMANY.
IF THERE IS NO TAG ATTACHED, THE SKYWALK SEAL MUST BE VISIBLE. THIS
SEAL CONFIRMS THAT THIS GLIDER MODEL IS IDENTICAL IN CONSTRUCTION
TO THE MODEL TESTED AT THE INSPECTION CENTER. IF THIS SEAL IS MISS-
ING, IT MUST BE ASSUMED THAT THIS IS AN UNINSPECTED PROTOTYPE.
To Next Page
Loading...
