MATTRESS assembly
8
BEFORE YOU BEGIN
u Carefully check the contents of your mattress boxes.
Each component is clearly labeled with the part name and
part number.
u IMPORTANT NOTE Prepare your foam pad(s)
Carefully open the foam comfort pad(s) and set aside.
At least 20 minutes of expansion time is needed.
u Orientation
These instructions refer to “left” and “right” as if you are standing
at the head of the bed looking toward the foot of the bed.
u Using a Surge Protector
While the Firmness Control
™
System may be plugged directly into
a wall outlet, we recommend using a surge protector to guard against
unexpected power surges. We recommend using a surge protector that is
listed to UL
®
1449 with a clamping voltage of 330 volts, and a joule rating
of 700 or higher.
Please note: Your 20-Year Limited Warranty does not cover damage to the
Firmness Control
™
System due to a power surge, regardless of the source.
See the Limited Warranty for more details.
If you are missing any
items listed on the
following page, please
e-mail Customer Service
at customerservice@
selectcomfort.com or
call the number on the
back cover.
TROUBLESHOOTING
For answers to some common
questions regarding your
mattress, see the Frequently
Asked Questions at the end
of this manual.
“ This is the first time in
three years that I slept
throught the entire night
without getting up two or
three times. I’m thrilled
and amazed! Unbelievable!
I wish we had purchased
your sleeping system
years ago.”
- Keith F., Jackson, MI
To Next Page
Loading...