SLEEP NUMBER Full - Page 23

21
Advanced antimicrobial safeguards are incorporated into every SLEEP NUMBER
®
bed. Key components of the mattress have been treated to protect the bed from
contaminants such as mold, mildew and bacteria growth. The unique, zip-open
design of the Sleep Number bed allows you to easily open, ventilate or vacuum if
you choose.
In rare instances under the right conditions, mold or mildew can form inside many
types of mattresses, bedding or upholstered products. Should this condition occur
in your mattress, please contact our customer service department so we can work
with you to return your bed to factory-fresh condition. For more information, visit
sleepnumberfacts.com.
TRANSPORTING YOUR SLEEP NUMBER
®
BED
Your Sleep Number bed is lighter than any conventional bed, making it much easier
to move.
Moving it yourself
• Thebaseshouldalwaysbedisassembled.Bagallhardwaresothatitisnotlost.
• Ifyouhaveafull-sizemattressmovingbox,themattresscanbefullyinated,cappedoff
and packaged.
• If you don’t have a mattress box, the cover and foam should all be double bagged to prevent
stains. The chambers should be deflated and boxed to prevent possible abrasions and
other damage.
• TheFirmnessControl
™
System should be packed in a box, surrounded by some sort of
packing material if the original box is not available.
• Theremote,capsandinstructionsshouldbetuckedintheboxwiththepumptoprevent
them from being lost.
U
sing a moving company
• Thebaseshouldalwaysbedisassembled.Bagallhardwaresothatitisnotlost.
• Themattresscanbefullyinated,cappedoff,andshouldbepackagedinamattressbox
for moving.
• TheFirmnessControl
™
System should be packed in a box, with packing material, and
transported in a manner where it will be exposed to minimal shock and vibration.
CREATING A HEALTHY
SLEEP ENVIRONMENT
An estimated 50 million Americans
suffer from allergies, and the
bedroom presents some especially
difficult challenges. A few simple
steps you can take to create a
healthy sleep environment include:
• Useadehumidiertoreduceany
potential mold or mildew growth.
Keep humidity levels under 60
percent.
• Useahigh-qualitymattresspad
to protect your mattress from
moisture. You may want
to consider a waterproof
mattress pad if you perspire
heavily while sleeping.
• Useallergencoversonpillows
and mattresses to reduce dust
mites, which can trigger allergies
and asthma. Wash bedding
weekly in hot water.
• Vacuumthebedroomregularly,
using a high quality vacuum
cleaner such as one with a
HEPA filter, one that does deep
cleaning, or a central vacuum
system.
• Wait20-30minutesbefore
making your bed each morning,
turning the covers back and
allowing the mattress to air out
for a bit.
• Ifpossible,avoidplacingyourbed
on an outside wall or above an
air conditioning or heating vent,
which can cause condensation
and increase the likelihood of
mold growth in many mattresses.
• Youcouldalsouseahigh-quality
electronic air purifier to remove
additional airborne
particulates from the bedroom.
• Pleasenote:Ozonegenerators
ARE NOT recommended for
use in the same room with the
Sleep Number bed, as they can
degrade components of the bed
over time.