K
Kelly ClarkJul 28, 2025
What to do if Slime ELITE HEAVY DUTY TIRE INFLATOR inflator does not turn on?
- JjacobmarshallJul 28, 2025
If your Slime Power Tool inflator does not turn on, try the following: * Allow the unit to cool for 25 minutes before retrying. * Check the fuse; it may have tripped. Replace the 12V fuse with a 15A 250V (5mm×20mm) fuse. * Inspect the receptacle and plug terminals for dirt, especially tobacco. Use a non-conductive probe to carefully remove any debris. * Ensure the power plug is firmly pushed into the receptacle and twist it back and forth. * Verify that the Inflate-Right™ pressure is not set at or below the desired pressure; if so, reset it.