SMA Solar Technology AG Installing the Device
Installation Guide SMC9-11TLRP-IEN100640 19
2. Secure the wall mounting bracket to the wall using
appropriate screws and washers.
3. Using the mounting hole, attach the inverter to the
rear panel of the enclosure in the wall mounting
bracket.
CAUTION!
Risk of injury due to the heavy weight of the inverter!
The inverter weights approx. 35 kg.
• Attach the wall mounting bracket with the corresponding mounting material
(depending on the surface).
• Use the side handles (above and below)
or a steel rod (maximum diameter of
30 mm) for transport and mounting. The
rod must be pushed through the
enclosure openings.
To Next Page
Loading...
