SMA Solar Technology AG Electrical Connection
Installation Guide SMC9-11TLRP-IEN100640 29
5.3 Setting the Display Language
You can set the language of the display using the switches on the underside of the display assembly
inside the inverter.
Procedure
1. Open the inverter as described in section 7.2”Opening the Inverter” (page56).
2. Set the switches for the required language, as
shown below.
3. Close the inverter as described in section 7.3”Closing the Inverter” (page59).
☑ The display language is now set.
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A
To Next Page
Loading...
