Decommissioning SMA Solar Technology AG
80 SMC9-11TLRP-IEN100640 Installation Guide
10 Decommissioning
10.1 Dismantling the Inverter
1. Open the inverter as described in section 7.2”Opening the Inverter” (page56).
2. Remove all cables from the inverter.
3. Close the inverter with the 6 screws and the
corresponding tooth lock washers.
4. Remove the air grills from both sides.
5. Remove the two screws on the left and right side of
the inverter that attach it to the wall bracket.
6. Disconnect the anti-theft protection, if applicable.
7. Remove the inverter upwards from the wall
mounting bracket.
To Next Page
Loading...
