SMA MD.SEN-US-40 - Page 19

6 Connection
SMA Solar Technology AG
Installation Manual MDSEN-US-40-IA-en-13 19
Circuitry overviews:
A2 (B2)
SMA Sensor Module
A3 (B3)
A4 (B4)
A5 (B5)
ϑ
A1 (B1)
Temperature sensor
with Pt100 or Pt1000
measuring shunt
Shield
Figure 6: Connection of a temperature sensor with four-conductor connection technology
A2 (B2)
SMA Sensor Module
A3 (B3)
A4 (B4)
A5 (B5)
ϑ
A1 (B1)
Temperature sensor
with Pt100 or Pt1000
measuring shunt
Shield
Figure 7: Connection of a temperature sensor with two-conductor connection technology
Procedure:
1. Connect the connection cable to the temperature sensor (see the manual from manufacturer).
Trim the unneeded insulated conductors up to the cable shield and note down the conductor
colors.