SMA MEDIUM VOLTAGE POWER STATION 500SC-JP - Product Overview; System Overview

3 Product Overview
3.1 System Overview
The MVPowerStation is a complete solution for PV power plants. All devices required to convert the direct current
generated by the PV modules into alternating current and to feed this current into the medium-voltage grid are located
in the MVPowerStation. The MVPowerStation is based on a modular concept in which you can select the devices
according to the specific project requirements. The MVPowerStation may contain one or two inverters.
Figure 1: Design of the PV power plant with MVPowerStation (example)
3.2 Design of the MVPowerStation
Figure 2: Design of the MVPowerStation
Position Designation Explanation
A Protective roof The roof protects the devices from direct solar irradiation.
B Service platform The elevated position of the service platform facilitates opera-
tion of the devices and is part of the cooling concept of the
MVPowerStation.
3 Product Overview
SMA Solar Technology AG
System Manual 19MVPS22JP-SH-en-11