SMA STP 110-60 - Product Overview

5 Product Overview
SMA Solar Technology AG
Operating manual STP110-60-BE-en-16 19
5 Product Overview
5.1 Product Description
A
B
C
Figure 1: Design of the product
Position Designation
A LEDs
The LEDs indicate the operating state of the product.
B Type label
The type label clearly identifies the product. The type label must remain per-
manently attached to the product. You will find the following information on
the type label:
• Device type (Model)
• Serial number (Serial No. or S/N)
• Date of manufacture
• Device-specific characteristics
C Cable compartment cover