12 Decommissioning the Inverter
SMA Solar Technology AG
Operating manual STP50-4x-BE-en-23 119
19. To pack the inverter: remove all 4 transport handles
from the threaded holes. If necessary, insert a
screwdriver into the holes on the transport handle
and use the screwdriver to remove the transport
handle.
20. To pack the inverter: pull the upper part of the original packaging over the inverter.
21. To pack the inverter: insert the upper padding.
22. To pack the inverter: close the packaging.
23. To pack the inverter: secure the packaging and pallet with strapping or with fastening belts.
24. Dispose of the inverter in accordance with the locally applicable disposal regulations for
electronic waste.
To Next Page
Loading...
