EasyManua.ls Logo

SMA STP 50-40 - Page 121

SMA STP 50-40
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 Technical Data
SMA Solar Technology AG
Operating manual STP50-4x-BE-en-23 121
Rated grid frequency 50Hz
Grid frequency
3)
50 Hz / 60 Hz
Operating range at grid frequency 50Hz 44Hz to 55Hz
Operating range at grid frequency 60Hz 54Hz to 65Hz
Power factor at rated power 1
Displacement power factor, adjustable 0.0overexcitedto0.0underexcited
Feed-in phases 3
Connection phases 3 (+1)
Overvoltage category as per IEC 62109-1 III
Multifunction relay
Maximum DC switching voltage 30V
Maximum AC switching current 1.0A
Maximum DC switching current 1.0A
Minimum load 0.1W
Minimum electrical endurance when the maxi-
mum switching voltage and maximum switching
current are complied with
4)
100000 switching cycles
Efficiency
Maximum efficiency, η
max
> 98.1%
European weighted efficiency, η
EU
> 97.8%
Protective devices
DC reverse polarity protection Short-circuit diode
Input-side disconnection point DC load-break switch
5)
DC overvoltage protection Surge arrester type1 and 2 (optional)
AC short-circuit current capability Current control
Grid monitoring SMA Grid Guard 10.0
Maximal output overcurrent protection 100A
Ground fault monitoring Insulation monitoring: R
iso
>34kΩ
All-pole sensitive residual-current monitoring unit Available
Active anti-islanding method Frequency shift
4)
Corresponds to 20years at 12switching operations per day
5)
Usage category according to IEC60947: DC-PV2

Table of Contents

Related product manuals