SMA SUNNY BEAM - Commissioning Process

SMA America, LLC Commissioning
User Manual BeamBT-eng-BUS110712 23
6 Commissioning
6.1 Notes
A Bluetooth PV system must only be commissioned with 1 master (e.g. Sunny Beam with
Bluetooth, Sunny Explorer).
Always commission a Bluetooth PV system with 1 master only. As soon as the Bluetooth
network is up and running, you can introduce further masters into the Bluetooth network.
Before commissioning the PV system, a free NetID needs to be detected.
Before you can start operating your Bluetooth PV system, you need to detect a free NetID
using the Sunny Beam. For more information see section 6.3 "Determining free NetID"
(page25).
Alternatively, you can also determine a free NetID using a computer with Bluetooth and
the Sunny Explorer software by SMA. For more information on how to do this, refer to the
Sunny Explorer help. You can obtain the Sunny Explorer for free in the download section
of www.SMA-America.com.