SMA America, LLC Commissioning
User Manual BeamBT-eng-BUS110712 29
11. Press the button.
☑ No items remain dark. The time zone has been set.
12. Move the selection frame to the button ">>" by turning the button.
☑ The button becomes dark.
13. Press the button.
☑ The page for setting the date and time appears.
Setting the date
14. Press the button.
☑ The first adjustable digits of the date become dark.
15. Turn the button until the required value is displayed.
16. Press the button and repeat the steps until no digits are dark.
To change incorrect values, press the push button until the value that you need to change
becomes dark.
☑ The date has been set.
To Next Page
Loading...