SMA SUNNY BEAM - Symbol for the Connection Quality

SMA America, LLC Operation
User Manual BeamBT-eng-BUS110712 49
7.5.1 Symbol for the Connection Quality
The symbol for connection quality indicates whether the Sunny
Beam is connected to a device in your PV system and the quality
of this connection.
The Sunny Beam only shows the symbol together with the
"Power today" chart.
When the Sunny Beam is establishing a connection, this is indicated by the following symbol: .
A larger view of the connection quality and the serial number of the device (inverter or SMABluetooth
repeater) through which the Sunny Beam is connected to the entire PV system can be found in the
menu "Service > Diagnosis > Connection quality" (section 7.10.1 "Checking the Connection Quality"
(page59)).
Symbol Connection quality
very good
good
unreliable
critical
none