EasyManua.ls Logo

SMA SUNNY BEAM - System Settings; Calling up the List of Connected Inverters

SMA SUNNY BEAM
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SMA America, LLC Operation
User Manual BeamBT-eng-BUS110712 65
7.11 System Settings
7.11.1 Calling up the List of Connected Inverters
You can call up a list of all inverters which are connected to the
Sunny Beam. The Sunny Beam does not display SMABluetooth
Repeaters to which there is a connection.
1. Select "Settings > PV plant > Devices connected".
The list of connected inverters appears.
Inverters that are marked with a checkmark ( ) have the same
system password as the Sunny Beam. If the inverters have a
different system password than the Sunny Beam, they are marked with a lock ( ). Inverters to which
the Sunny Beam temporarily cannot establish a connection are marked with a cross (see section
12 "Troubleshooting" (page84)).

Table of Contents