Figure 4: Position of the anchoring points (dimensions in mm (in))
Recommended clearances:
If you maintain the recommended clearances, adequate heat dissipation will be ensured. Thus, you
will prevent power reduction due to excessive temperature.
☐ Maintain the recommended clearances to walls as well as to other inverters or objects.
☐ If multiple inverters are mounted in areas with high ambient temperatures, increase the
clearances between the inverters and ensure sufficient fresh-air supply.
5Mounting
SMA Solar Technology AG
Operating ManualSB15-25-1VL-40-BE-en-1120
To Next Page
Loading...
