SMA Solar Technology AG The communication module (Quick Module)
Installation Guide SB20_25_30HF-IEN102911 27
Should the inverter not be set to the installation country, you have several options to configure the
country standard required.
• Setting via 2 rotary switches in Quick Module, as described in section 5.3.4”Setting the
Country Standard and Language using Rotary Switches” (page29).
• Alternatively you can adjust the setting via the "CntrySet" or "Set country standard" parameters
with a communication device (e.g. Sunny Data Control or Sunny Explorer), once you have
commissioned the inverter.
•If you require adjusted parameter settings for your installation location, you can change these
with the help of a communication device.
8 8 UL1741/240 *** English No USA
8 9 UL1741/240 *** Spanish No USA
8 A UL1741/240 *** French No USA
9 8 UL1741/auto *** English No USA
9 9 UL1741/auto *** Spanish No USA
9 A UL1741/auto *** French No USA
D 0 Off-Grid 60Hz English No Flexible
D 1 Off-Grid 60Hz German No Flexible
D 2 Off-Grid 60Hz French No Flexible
D 3 Off-Grid 60Hz Spanish No Flexible
D 4 Off-Grid 60Hz Italian No Flexible
D 5 Off-Grid 60Hz Not programmed** No Flexible
D 6 Off-Grid 60Hz Not programmed** No Flexible
E 0 Off-Grid 50Hz English No Flexible
E 1 Off-Grid 50Hz German No Flexible
E 2 Off-Grid 50Hz French No Flexible
E 3 Off-Grid 50Hz Spanish No Flexible
E 4 Off-Grid 50Hz Italian No Flexible
E 5 Off-Grid 50Hz Not programmed** No Flexible
E 6 Off-Grid 50Hz Not programmed** No Flexible
a) Special setting: Bluetooth transmission power reduced (in accordance with French standards)
*) In planning
**) Currently not programmed. The previously configured display language remains set.
***) This country standard must only be set for Sunny Boy 2000HF-US / 2500HF-US / 3000HF-US.
(A) (B) Country data set Display language Grid guard
protection
Country
To Next Page
Loading...
