SMA SUNNY BOY 2000HF - Setting the Country Standard and Language Using Rotary Switches

SMA Solar Technology AG The communication module (Quick Module)
Installation Guide SB20_25_30HF-IEN102911 29
5.3.4 Setting the Country Standard and Language using
Rotary Switches
1. Open the Quick Module, as described in section 5.3.3”Opening the Quick Module”
(page28).
2. Set the arrows on both left rotary switches (A and
B) using a screw driver to the desired positions (see
table in section 5.3.2”Checking the Country
Standard” (page25)). The width of the screwdriver
should be 2.5 mm.
☑ The country standard and the language are set.
Jumper for English language
You can also set the language to English by
means of a jumper (e.g. for service purposes).
• To do this, plug the jumper onto both left
pins as shown on the right.