SMA Solar Technology AG The communication module (Quick Module)
Installation Guide SB20_25_30HF-IEN102911 37
5.6 Slot for SD card
The Quick Module is fitted with a slot for an SD card. The
slot is to be found on the outside of the Quick Module (A).
There are a number of cases which require an SD card to be read in, such as:
• Under consultation with the SMAServiceline, a firmware update is necessary.
SMA Solar Technology AG will send you a file with the firmware update per e-mail.
You will find the description of the Firmware update in the download area at www.SMA.de/en.
Properties of the SD Card
Use an SD card that is FAT16 or FAT32 formatted and has a maximum storage capacity
of 2 GB.
Use the SD card exclusively for this inverter. Do not save any multimedia files or other
unsuitable files on the SD card.
To Next Page
Loading...
