Decommissioning SMA Solar Technology AG
80 SB20_25_30HF-IEN102911 Installation Guide
12 Decommissioning
12.1 Dismantling the Inverter
1. Disconnect the inverter on the AC and DC sides as described in section 8”Disconnect the
Inverter from Voltage Sources” (page60).
2. Loosen the connection screw between the
enclosure and the wall or loosen the security lock.
3. Remove the inverter from the wall mounting
bracket.
☑ The inverter is dismantled.
CAUTION!
Danger of burn injuries due to hot enclosure parts.
• Wait 30 minutes before disassembling until the housing has cooled down.
To Next Page
Loading...
