12 Decommissioning the Inverter
SMA Solar Technology AG
Operating manualSBxx-1AV-41-BE-en-1298
6. Unscrew and remove the threaded sleeve from the
network port thread on the inverter.
7. Release the network cable plug and pull it out of the
jack on the inverter.
8. Take the cable support sleeve out of the threaded
sleeve and remove the network cable from the cable
support sleeve.
9. Lead the network cable out of the threaded sleeve
and the swivel nut.
10. Screw the protective cap onto the network port.
11. Unscrew and remove the antenna.
To Next Page
Loading...
