SMA sunny home manager - Configuring System Reports

Requirement:
☐ You must have the user role Installer or PV System Administrator (see Section13.1,
page120).
Configuring Info Reports
You can configure three "Daily info reports" and three "Monthly info reports", each with different
content.
SunnyPortal sends you the "Daily info reports" when it has processed all the data from the previous
day and the "Monthly info report" at the end of the month.
Requirement:
☐ You must have entered the CO
2
avoided factor (see Section12.12, page117).
Procedure:
1. Select Configuration > Report configuration in the page and menu selection.
2. In the drop-down list Report Configuration, select a Daily info report or a Monthly info
report.
3. Select [Edit].
4. Configure the report:
Range Explanation
Activate report
• Activate the checkbox Active.
Recipient • Enter the e-mail address(es) of the recipient(s) in
the text field E-mail address(es). If you enter
several e-mail addresses, separate these by
commas.
Content
• In the area Select channel(s), activate the
content that is to be displayed in the e-mail.
• In the area Send report as, select the format in
which SunnyPortal is to send the report.
If SunnyPortal is to send a SunnyPortal page
along with the report, select a page in the drop-
down list in the area Portal Page to Be Sent.
• If SunnyPortal is not to send a SunnyPortal page
along with the report, select Send no page.
5. To send a test report to the stated e-mail address, select [Send test report].
6. Select [Save].
Configuring Event Reports
You can configure three event reports, each with different content.
SunnyPortal sends you the event reports at the times set.
11 System Monitoring
SMA Solar Technology AG
User Manual 103HoMan_Portal-BA-en-20