SMA sunny home manager - Changing Operator Data; Changing;Deleting the System Image

3. Select [Edit].
☑ The menu for setting system data opens.
4. Enter a description in the area Description.
5. Select [Save].
12.6 Changing Operator Data
The operator is a private individual or legal entity who owns PV systems for business purposes, for
example. The operator can farm out use of the PV system without necessarily being the user himself.
The name of the operator is displayed on the page PV system profile.
Requirement:
☐ You must have the user role Installer or PV System Administrator (see Section13.1,
page120).
Procedure:
1. Select Configuration > PV system properties in the page and menu selection.
2. Select the tab Operator.
3. Select [Edit].
☑ The menu for setting the operator data opens.
4. Enter the operator data.
5. Select [Save].
12.7 Changing/Deleting the System Image
The system image is the image in the page and menu selection next to the menu item "My
SunnyHomeManager system".
Figure 15: PV system image
You can replace the standard system image with a user-defined system image. The user-defined
system image will also be displayed at the following locations:
• On the PV system profile page
• If pages have been released for SunnyPortal, the system image will be shown on the list of
released systems on the www.SunnyPortal.com homepage.
You can save several images in a gallery in SunnyPortal. This makes it easy to change the system
image and access your images from different computers.
12 System Settings
SMA Solar Technology AG
User Manual 111HoMan_Portal-BA-en-20